Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate traction control (TRC OFF) on the Toyota RAV 4

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

In a few simple steps, learn how to deactivate traction control (TRC OFF) on the Toyota RAV 4; it is not recommended to deactivate traction control on tarmacked roads, as it may compromise vehicle stability. First, get in the vehicle and turn on the ignition; then pull the handbrake three times, followed by pressing the brake pedal three times, as shown in the video.

At this point, turn off the ignition and wait about ten seconds, then repeat the process twice; you will see the traction control warning light turn off on the instrument panel.


Updated on 17 October 2026 by ScegliAuto


Related tutorials

How to deactivate the traction control of the Toyota RAV4
How to deactivate the traction control of the Toyota RAV4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) In this guide, we will see the information that will allow us to deactivate the traction control of the Toyota RAV 4. In some situations of poor grip…
How to deactivate the traction control on the Toyota RAV 4?
How to deactivate the traction control on the Toyota RAV 4?
Toyota Rav 4 (2000-2006 / MK 2, Xa20) To deactivate the traction control on the Toyota RAV 4, turn on the ignition by rotating the key in the ignition switch: once the dashboard lights up…
How to deactivate the traction control (TRC) of the Toyota RAV4.
How to deactivate the traction control (TRC) of the Toyota RAV4.
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Below we will see the steps that will allow us to deactivate the traction control of the Toyota RAV4. First, let's get inside the vehicle and start t…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos