Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Verso
    4. : Checks and maintenance

Toyota Verso - Checks and maintenance

Checks And Maintenance Toyota Verso (2009-2018 / mk 4)

Toyota Verso (2009-2018 / MK 4)
How to Disable Traction Control on the Toyota Verso?
You can disable the traction control on the Toyota Verso by first turning on the instrument panel, inserting and turning the ignition key in the corresponding …Read all…
Posted on 22 May 2026 by ScegliAuto
Toyota Verso (2009-2018 / MK 4)
How to Disable the Speed Warning on a Toyota Verso?
You can disable the speed warning on a Toyota Verso by turning on the instrument panel and then pressing the SETUP button next to the central display: you will …Read all…
Posted on 8 March 2026 by ScegliAuto
Toyota Verso (2009-2018 / MK 4)
Where is the OBD2 port of the Toyota Verso located?
To have access to the OBD2 port of your Toyota Verso, you need just a few seconds. All you have to do is carefully read the steps described in the following …Read all…
Posted on 11 November 2025 by ScegliAuto
Toyota Verso (2009-2018 / MK 4)
How do you deactivate the traction control of the Toyota Verso?
It will be possible to deactivate the traction control of the Toyota Verso by first inserting the ignition key into the corresponding slot: once the dashboard …Read all…
Posted on 4 September 2025 by ScegliAuto
Toyota Verso (2009-2018 / MK 4)
Which fuse is for the horn in a Toyota Verso?
If the horn on your Toyota Verso has suddenly stopped working, first check the status of the relevant fuse, which is indicated in this video. As shown, the …Read all…
Posted on 25 September 2026 by ScegliAuto
Cigarette lighter (1) Shocks (2) Car stereo (1) Roof rack bars (1) Battery (1) Key (4) Timing belt (6) V-belt (1) Checks and maintenance (5) Brake rotors (1) Headlight (1) Tail light (1) Air filter (4) Cabin air filter (3) Diesel fuel filter (2) Oil filter (1) Parking brake (2) Headlight bulb (2) Tail light bulb (6) Starter motor (3) Engine oil (1) Clock (8) Door trim panel (2) Fuel pump (2) Fuse box (17) Seat (1) Warning light – error code (3) (5) Tire pressure warning light (7) Service warning light (37) EGR valve (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos