Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Which fuse is for the horn in a Toyota Verso?

Model: Toyota Verso MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

If the horn on your Toyota Verso has suddenly stopped working, first check the status of the relevant fuse, which is indicated in this video. As shown, the fuse in question is located in the box inside the engine compartment, protected by the plastic cover next to the air filter.

It is a 15A fuse and is the second one in the central column when looking at the box from the front. If faulty, ensure you use a replacement with equivalent specifications and operate with the vehicle turned off to avoid damaging any devices.


Updated on 25 September 2026 by ScegliAuto


Related tutorials

How to replace the fuse of the cigarette lighter socket in the Toyota Verso
How to replace the fuse of the cigarette lighter socket in the Toyota Verso
Toyota Verso (2009-2018 / MK 4) The fuse for the cigarette lighter socket of the Toyota Verso is located inside the box inside the cabin. To replace it, we need to remove the driver…
What is the Fuse Diagram for the Toyota Verso?
What is the Fuse Diagram for the Toyota Verso?
Toyota Verso (2009-2018 / MK 4) In this video, you can see where the fuse boxes are located and their respective diagrams in the Toyota Verso, useful in case you need to check the f…
Where to find and how to reach the fuse box of a Toyota Verso?
Where to find and how to reach the fuse box of a Toyota Verso?
Toyota Verso (2009-2018 / MK 4) Good morning, today's guide aims to discover the location of the fuse box in our Toyota Verso. Start by sitting in the driver's seat of the car. Next…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos