Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 port of the Toyota Verso located?

Model: Toyota Verso MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

To have access to the OBD2 port of your Toyota Verso, you need just a few seconds. All you have to do is carefully read the steps described in the following guide and apply them step by step.

First, you need to reach the driver's seat and make sure the car is completely turned off for safety reasons. Once you have done that, shift your attention to the lower area of the dashboard and locate the OBD2 port you were looking for. After finding it, you can connect a diagnostic tool compatible with your Toyota Verso in order to analyze the engine control unit.


Posted on 11 November 2025 by ScegliAuto


Related tutorials

Where to find and how to reach the fuse box of a Toyota Verso?
Where to find and how to reach the fuse box of a Toyota Verso?
Toyota Verso (2009-2018 / MK 4) Good morning, today's guide aims to discover the location of the fuse box in our Toyota Verso. Start by sitting in the driver's seat of the car. Next…
Where to Find and How to Access the Fuse Box on a Toyota Verso?
Where to Find and How to Access the Fuse Box on a Toyota Verso?
Toyota Verso (1995-2002 / MK 1) The fuse box on your Toyota Verso is located behind the glove compartment of the front passenger side. Start by entering the cabin of your vehicle. N…
Where is the EGR Valve Located in the Toyota Verso?
Where is the EGR Valve Located in the Toyota Verso?
Toyota Verso (2004-2009 / MK 3) In this video, you will see where the EGR valve is located in the Toyota Verso and how to proceed if you need to replace it, a very simple operation.…

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos