Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the EGR Valve Located in the Toyota Verso?

Model: Toyota Verso MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009
Part: EGR valve

See other generations:
Video tutorial

In this video, you will see where the EGR valve is located in the Toyota Verso and how to proceed if you need to replace it, a very simple operation. As shown, the valve is positioned at the front of the engine, about halfway up, right in front of the radiator.

Before proceeding, ensure that the engine is cool enough, then open the bonnet and remove the plastic cover. Next, unscrew the indicated bolts with a socket spanner, disconnect the upper manifold, and continue by removing the valve.

To fit the replacement, simply follow the reverse procedure.


Updated on 27 September 2026 by ScegliAuto


Related tutorials

Where is the OBD2 port of the Toyota Verso located?
Where is the OBD2 port of the Toyota Verso located?
Toyota Verso (2009-2018 / MK 4) To have access to the OBD2 port of your Toyota Verso, you need just a few seconds. All you have to do is carefully read the steps described in the fo…
Where to Find and How to Access the Fuse Box on a Toyota Verso?
Where to Find and How to Access the Fuse Box on a Toyota Verso?
Toyota Verso (1995-2002 / MK 1) The fuse box on your Toyota Verso is located behind the glove compartment of the front passenger side. Start by entering the cabin of your vehicle. N…
Where to find and how to reach the fuse box of a Toyota Verso?
Where to find and how to reach the fuse box of a Toyota Verso?
Toyota Verso (2009-2018 / MK 4) Good morning, today's guide aims to discover the location of the fuse box in our Toyota Verso. Start by sitting in the driver's seat of the car. Next…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos