Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Verso
  6. : Cabin air filter

Toyota Verso - Cabin air filter

Cabin Air Filter Toyota Verso (2009-2018 / mk 4)

Toyota Verso (2009-2018 / MK 4)
How to replace the cabin air filter on the 2017 Toyota Verso

Today, we will explain how to independently replace the cabin air filter on the 2017 Toyota Verso. To remove the filter, you need to take out the glove …Read all…
Posted on 5 June 2026 by ScegliAuto
Toyota Verso (2009-2018 / MK 4)
Replacement of Cabin Air Filter

The cabin air filter is located on the passenger side, just behind the glove compartment: to access the filter housing and carry out the replacement, you need …Read all…
Posted on 28 February 2026 by ScegliAuto
Toyota Verso (2009-2018 / MK 4)
Replacement of Cabin Air Filter

The cabin air filter is located on the passenger side, just behind the glove compartment; therefore, open the glove compartment, unclip the side stop, and …Read all…
Posted on 21 February 2026 by ScegliAuto

Cigarette lighter (1) Shocks (2) Car stereo (1) Roof rack bars (1) Battery (1) Key (4) Timing belt (6) V-belt (1) Checks and maintenance (5) Brake rotors (1) Headlight (1) Tail light (1) Air filter (4) Cabin air filter (3) Diesel fuel filter (2) Oil filter (1) Parking brake (2) Headlight bulb (2) Tail light bulb (6) Starter motor (3) Engine oil (1) Clock (8) Door trim panel (2) Fuel pump (2) Fuse box (17) Seat (1) Warning light – error code (3) Tire pressure warning light (12) Service warning light (38) EGR valve (1)

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos