Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the gearbox oil of a Triumph Scrambler 400, start by placing the motorcycle on a stable stand. First of all, make sure the engine is warm to facilitate complete oil drainage. Locate the gearbox oil drain plug, which is usually located at the bottom of the engine. Use a suitable wrench to remove the plug and let the oil drain completely into a container. Once the oil has been completely drained, reassemble the plug, making sure it is securely tightened. Next, fill the gearbox with the oil specified in the owner's manual through the designated filling hole. Check that the level is correct and reassemble the plug. Finally, start the engine and check for any leaks, making sure everything is functioning properly.

Posted on 3 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the air filter of the Triumph Scrambler 400 X?
How do you replace the air filter of the Triumph Scrambler 400 X?
Scrambler In order to replace the air filter of the Triumph Scrambler 400 X, you need to loosen the screws that secure the triangular side panel located on the…
How to change the engine oil of a Triumph Scrambler 900?
How to change the engine oil of a Triumph Scrambler 900?
Scrambler To change the engine oil of a Triumph Scrambler 900, start by briefly warming up the engine to thin the oil, but be careful not to overheat it. Posit…
How to Change the Engine Oil in a Triumph Scrambler?
How to Change the Engine Oil in a Triumph Scrambler?
Scrambler In this tutorial, you will see how to change the engine oil in a Triumph Scrambler, a very simple and quick operation. First, ensure that the engine …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos