Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Triumph Trident 660?

Model: Triumph Trident 660
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the engine oil in the Triumph Trident 660, an extremely simple and quick operation. First of all, make sure that the engine is sufficiently cold, then place a container under the motorcycle, locate the drain hole bolt and unscrew it using an 8mm hex key. Let all the oil in the system drain out, unscrew the old filter and tighten both the replacement and the bolt.

At this point, all that's left to do is to pour the necessary amount of oil through the appropriate upper hole.


Posted on 7 February 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Triumph Trident 660?
How to Change the Engine Oil on a Triumph Trident 660?
Trident 660 To change the engine oil on the Triumph Trident 660, you need to unscrew the oil drain plug located at the bottom of the bike, at the front. Once the…
How to replace the air filter of the Triumph Trident 660
How to replace the air filter of the Triumph Trident 660
Trident 660 Below we will discover the steps that will allow us to disassemble and replace the air filter of the Triumph Trident 660 engine. First, we put the mo…
How to replace the exhaust on the Triumph Trident 660?
How to replace the exhaust on the Triumph Trident 660?
Trident 660 You can replace the exhaust on the Triumph Trident 660 by loosening the screws that secure the exhaust end can to its housing, located near the rear …

How to Reset the Service Light on a KTM Super Duke 1290 R

This tutorial shows how to reset the service light on a KTM Super Duke 1290 R, a very simple and quick operation. Before proceeding, ensure that you have completed the required scheduled maintenance. Start by inserting the key and turning on the instrument panel, then navigate to the general menu, move the selector to "Options" and press the two indicated buttons. Adjust the two intervals using the directional arrows, return to the main screen, and restart the panel to verify that the reset was successful.

Watch the video!


by ScegliAuto

More videos