|
Do it yourself
| |||
| ||||
|
Model: Triumph Trident 660
To change the engine oil on the Triumph Trident 660, you need to unscrew the oil drain plug located at the bottom of the bike, at the front. Once the plug is unscrewed, collect the oil in a suitably positioned container until it has completely drained. You can then close the drain plug and remove the oil filter located above it. After replacing the filter, top up by adding new oil into the upper part of the crankcase on the right side of the bike.
Updated on 25 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Trident 660
In this tutorial we can see how to replace the engine oil in the Triumph Trident 660, an extremely simple and quick operation. First of all, make sur…
Trident 660
You can replace the exhaust on the Triumph Trident 660 by loosening the screws that secure the exhaust end can to its housing, located near the rear …
Trident 660
To replace the brake and clutch levers of the Triumph Trident 660, insert a flat screwdriver into the head of the screw that secures the lever to pre…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.167
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |