Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to reset the Service light on the Triumph Street Triple RS, you need to turn on the instrument panel inside the ignition switch, so that you can access the menu that will appear on the instrument panel: then you will need to press the white button on the right side of the handlebars and scroll through the menu with the lever on the left side. You will then need to select the "BIKE SETUP" option and then "SERVICE": at this point you will be able to select the "RESET" option to make the light disappear completely from the instrument panel. At the end of the reset, you can turn off the instrument panel.

Posted on 9 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery of the Triumph Street Triple?
How to Replace the Battery of the Triumph Street Triple?
Street Triple R To replace the battery of the Triumph Street Triple, loosen the screws located under the seat padding at the rear. Once these are removed, you can co…
How to Remove the Rear Wheel of the Triumph Street Triple
How to Remove the Rear Wheel of the Triumph Street Triple
Street Triple R This guide provides instructions for removing and replacing the rear wheel or tyre of the Triumph Street Triple. First, place the rear stand to lift …
How do you replace the headlight bulb of the Triumph Street Triple?
How do you replace the headlight bulb of the Triumph Street Triple?
Street Triple R The replacement of the headlight bulb of the Triumph Street Triple can be done by loosening the screws that secure the corresponding headlight: these…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos