Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Triumph Speed Twin?

Model: Triumph Speed Twin
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the engine oil in the Triumph Speed Twin, an extremely simple and quick operation. First of all, make sure that the engine is cold enough to work safely, then place a container under the motorcycle, locate the drain hole bolt and unscrew it using an 8mm hex key. Let all the oil in the system drain out, unscrew the old filter using pliers if necessary, and tighten both the replacement filter and bolt.

At this point, all that's left to do is to add the necessary amount of oil through the top hole.


Posted on 18 April 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on a Triumph Speed Twin 900
How to Change the Engine Oil and Oil Filter on a Triumph Speed Twin 900
Speed Twin These brief instructions will show you how to perform routine maintenance by changing the engine oil and oil filter on a Triumph Speed Twin 900. Firs…
How to replace the engine oil in the Triumph Speed Twin 1200?
How to replace the engine oil in the Triumph Speed Twin 1200?
Speed Twin .. In this tutorial, we can see how to replace the engine oil in the Triumph Speed Twin 1200, an extremely simple and quick operation.. …
How to Replace the Engine Oil and Oil Filter on the Triumph Speed Twin
How to Replace the Engine Oil and Oil Filter on the Triumph Speed Twin
Speed Twin Regular maintenance is essential; here’s how to change the engine oil and oil filter on the Triumph Speed Twin. First, place the motorcycle on its st…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos