Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Triumph Speed Twin 1200?

Model: Triumph Speed Twin
Part: Engine oil

Video tutorial

In this tutorial, we can see how to replace the engine oil in the Triumph Speed Twin 1200, an extremely simple and quick operation to be carried out every 12 months. First of all, make sure that the engine is cold enough, then place a container underneath it, locate the drain plug and unscrew it using a Torx T50 key. Wait for all the oil to drain out, unscrew the old filter, tighten both the replacement and the plug.

At this point, all that's left to do is pour the new oil through the designated upper hole.


Posted on 21 June 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Triumph Speed Twin 1200
How to Change the Engine Oil in a Triumph Speed Twin 1200
Speed Twin In this tutorial, see how to change the engine oil in a Triumph Speed Twin 1200, a very simple and quick operation. First, ensure the engine is cool …
Replacing the Coolant on a Triumph Speed Twin 1200
Replacing the Coolant on a Triumph Speed Twin 1200
Speed Twin In today’s video, we will see how to bleed and replace the coolant or antifreeze on a Triumph Speed Twin 1200 in simple and quick steps. First, remov…
How to Replace the Air Filter on the Triumph Speed Twin 1200
How to Replace the Air Filter on the Triumph Speed Twin 1200
Speed Twin To replace the air filter on the Triumph Speed Twin 1200, loosen the screws securing the filter box cover, located on the left side of the bike just …

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos