Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Coolant on a Triumph Speed Twin 1200

Model: Triumph Speed Twin
Part: Antifreeze coolant

Video tutorial

In today’s video, we will see how to bleed and replace the coolant or antifreeze on a Triumph Speed Twin 1200 in simple and quick steps. First, remove the right side cover of the bike, near the clutch cover, to access the coolant reservoir; to do this, unscrew all the securing screws as shown in the video.

Now perform the bleeding operation, checking the condition of the hoses; once all the old fluid is removed, proceed to top up with new fluid, filling to the maximum level!


Updated on 15 April 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the Triumph Speed Twin 1200
How to Replace the Air Filter on the Triumph Speed Twin 1200
Speed Twin To replace the air filter on the Triumph Speed Twin 1200, loosen the screws securing the filter box cover, located on the left side of the bike just …
How to Remove the Fuel Tank from the Triumph Speed Twin 1200
How to Remove the Fuel Tank from the Triumph Speed Twin 1200
Speed Twin This brief guide provides instructions on how to remove and detach the fuel tank from the Triumph Speed Twin 1200 motorcycle. First, place the motorc…
How to replace the engine oil in the Triumph Speed Twin 1200?
How to replace the engine oil in the Triumph Speed Twin 1200?
Speed Twin In this tutorial, we can see how to replace the engine oil in the Triumph Speed Twin 1200, an extremely simple and quick operation to be carried out …

How to Remove the Rear Wheel of the GasGas EC 250?

To remove the rear wheel of the GasGas EC 250, first dismantle the chain by removing it from the sprocket attached to the rear wheel. Once the chain is removed, you can unscrew the nut that secures the rear wheel spindle and holds it to the swingarm. When the securing spindle is removed, you can completely take out the wheel from its housing and replace it with a new spare part. After replacement, refit the securing spindle and reposition the chain around the sprocket.

Watch the video!


by ScegliAuto

More videos