Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Triumph Daytona 675?

Model: Triumph Daytona 675
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the engine oil in the Triumph Daytona 675, an extremely simple and quick operation. First of all, make sure that the engine is sufficiently cold, then remove the lower left fairing and place a container underneath the bike.

Next, locate the drain hole bolt, unscrew it using a 13mm socket wrench and let all the oil in the system drain out. At this point, all that's left to do is to unscrew the old filter, tighten the replacement, reassemble everything and pour the necessary amount of oil through the designated upper hole.


Posted on 12 May 2025 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement for the Triumph Daytona 675
Engine Oil and Oil Filter Replacement for the Triumph Daytona 675
Daytona 675 In this brief guide, we will cover the steps necessary for replacing the engine oil and oil filter as part of the regular maintenance service for the…
How to Change the Engine Oil in the Triumph Daytona 675?
How to Change the Engine Oil in the Triumph Daytona 675?
Daytona 675 In this tutorial, you will see how to change the engine oil in the Triumph Daytona 675, a very simple and quick operation to be carried out every 12 …
How to Remove the Rear Wheel of the Triumph Daytona 675
How to Remove the Rear Wheel of the Triumph Daytona 675
Daytona 675 Follow these instructions to remove and replace the rear wheel or tyre of the Triumph Daytona 675 motorcycle. First, lift the rear wheel off the grou…

How to Remove the Rear Wheel of the Triumph Tiger 800

To remove the rear wheel of the Triumph Tiger 800, loosen the nuts located in the centre of the wheel that secure the central axle to the end of the swingarm. Once these two nuts are removed, unscrew the bolts that secure the rear brake caliper, detaching it from the disc; you will also need to move the chain from the corresponding sprocket. When all these components have been removed, it will be possible to completely detach the wheel, allowing you to insert a new replacement part, reassembling all previously removed components.

Watch the video!


by ScegliAuto

More videos