Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Triumph Tiger 1200 Rally Explorer remote control?

Model: Triumph Tiger 1200 Rally Explorer
Part: Key

Video tutorial

In this tutorial we can see how to replace the battery of the remote control of the Triumph Tiger 1200 Rally Explorer, an extremely simple and quick operation. To do this we will need a 1.5mm hex key, a small screwdriver with a flat tip and a replacement battery of type CR2032. First, unscrew the small screw on the back of the remote control, then separate the door by levering with the screwdriver.

At this point, remove the old battery, insert the replacement battery respecting the polarity and reassemble everything following the reverse procedure.


Posted on 26 May 2025 by ScegliAuto


Related tutorials

Resetting the Service Light on a Triumph Tiger 1200 Rally Explorer
Resetting the Service Light on a Triumph Tiger 1200 Rally Explorer
Tiger 1200 Rally Explorer In this guide, you will discover the instructions necessary to reset the service light for routine maintenance on the Triumph Tiger 1200 Rally Explor…
How do you replace the engine oil of the Triumph Tiger 1200 Rally Explorer?
How do you replace the engine oil of the Triumph Tiger 1200 Rally Explorer?
Tiger 1200 Rally Explorer To replace the engine oil of the Triumph Tiger 1200 Rally Explorer, you will need to unscrew the drain plug of the oil pan located in the central low…
How to Replace the Rear Brake Pads on a Triumph Tiger 1200 Rally Explorer?
How to Replace the Rear Brake Pads on a Triumph Tiger 1200 Rally Explorer?
Tiger 1200 Rally Explorer To replace the rear brake pads on the Triumph Tiger 1200 Rally Explorer, loosen the screws that secure the brake caliper to the corresponding disc: o…

How to Reset the Service Light on a KTM Super Duke 1290 R

This tutorial shows how to reset the service light on a KTM Super Duke 1290 R, a very simple and quick operation. Before proceeding, ensure that you have completed the required scheduled maintenance. Start by inserting the key and turning on the instrument panel, then navigate to the general menu, move the selector to "Options" and press the two indicated buttons. Adjust the two intervals using the directional arrows, return to the main screen, and restart the panel to verify that the reset was successful.

Watch the video!


by ScegliAuto

More videos