Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Triumph
    3. : Tiger 800 Xcx
In this tutorial, we can see how to replace the engine oil in the Triumph Tiger 800 XCx, a very simple and quick operation. First of all, make sure that the engine is cold enough, then remove the lower protection cover and place a container under the engine. Next, locate the drainage hole bolt, unscrew it using an 8mm hex key, and let all the oil in the system drain out. Then unscrew the old filter, tighten both the replacement and the bolt, and pour the new oil through the appropriate hole.

Posted on 20 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Indicator Bulb on a Triumph Tiger 800 XCX
How to Replace the Front Indicator Bulb on a Triumph Tiger 800 XCX
Tiger 800 Xc To replace the front indicator bulb on a Triumph Tiger 800 XCX, access the lower part of the headlamp, located between the headlamp and the mudguard:…
How to replace the engine oil in the Triumph Tiger 800?
How to replace the engine oil in the Triumph Tiger 800?
Tiger 800 Xc In this tutorial we can see how to replace the engine oil in the Triumph Tiger 800, an extremely simple and quick operation. First of all, we wait fo…
How to Replace the Engine Oil and Oil Filter on a Triumph Tiger 800
Tiger 800 Xc To ensure the longevity of your engine, it is necessary to regularly perform routine maintenance; here’s how to replace the engine oil and oil filter…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos