Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the headlight bulbs in the Triumph Bonneville T100, a very simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then remove the headlight cover by unscrewing the bolts with a 12mm socket wrench. Next, unscrew the two additional screws indicated using a 5mm hex key, separate the headlight from the base and disconnect the power connector. At this point, all that remains is to remove the rubber cap, replace the faulty bulb and reassemble everything following the reverse procedure.

Posted on 19 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front headlight bulb of the Triumph Bonneville T100?
How do you replace the front headlight bulb of the Triumph Bonneville T100?
Bonneville T100 To replace the headlight bulb of the Triumph Bonneville T100, you need to loosen the screws that secure the headlight unit to its housing: these scre…
How do you replace the battery of the Triumph Bonneville T100?
How do you replace the battery of the Triumph Bonneville T100?
Bonneville T100 In order to replace the battery of the Triumph Bonneville T100, you need to completely remove the seat of the motorcycle, so that you can access the …
How do you replace the air filter of the Triumph Bonneville T100 LC?
Bonneville T100 In order to replace the air filter of the Triumph Bonneville T100 LC, you will need to remove the intake sleeve located in the central part of the bi…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos