Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Below are the instructions that will allow you to dismantle and replace the headlight bulbs on a Triumph Bonneville T100 motorcycle. First, place the motorcycle on its stand and begin by removing the side trim of the headlight by unscrewing the screws of the headlamp to take it off; disconnect the electrical connector for the lights found at the rear. At this point, replace the position bulb and the dipped and main beam bulbs if necessary, ensuring they are the correct type and have the same fitting; check the operation of the lights and finally reassemble the headlight unit!

Posted on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulbs on the Triumph Bonneville T100?
How to replace the headlight bulbs on the Triumph Bonneville T100?
Bonneville T100 In this tutorial we can see how to replace the headlight bulbs in the Triumph Bonneville T100, a very simple and quick operation. First of all, make …
How do you replace the front headlight bulb of the Triumph Bonneville T100?
How do you replace the front headlight bulb of the Triumph Bonneville T100?
Bonneville T100 To replace the headlight bulb of the Triumph Bonneville T100, you need to loosen the screws that secure the headlight unit to its housing: these scre…
How to Replace the Indicator on a Triumph Bonneville T100?
How to Replace the Indicator on a Triumph Bonneville T100?
Bonneville T100 To replace the indicator on a Triumph Bonneville T100, loosen the bolts located on the side of the windscreen to remove the support that holds the in…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos