Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the exhaust on the Triumph Street Triple 765?

Model: Triumph Street Triple 765r
Part: Exhaust muffler

Video tutorial

The replacement of the exhaust installed on the Triumph Street Triple 765 can be carried out by loosening the screws that secure the end can to its housing: this will be located on the right side of the bike, in the central lower part. Once the screws securing the brackets have been loosened, it will be possible to proceed by widening the clamp positioned between the exhaust and the collector: then it will now be possible to completely remove it to install the new one. The latter can now be secured and connected, ensuring it works properly.


Posted on 10 January 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads on the Triumph Street Triple 765 RS?
How to Replace the Rear Brake Pads on the Triumph Street Triple 765 RS?
Street Triple 765r In this tutorial, see how to replace the rear brake pads on the Triumph Street Triple 765 RS, a very simple and quick operation. Start by positioning…
How to replace the headlight bulbs in the Triumph Speed Triple 765 R?
How to replace the headlight bulbs in the Triumph Speed Triple 765 R?
Street Triple 765r In this tutorial, we can see how to replace the headlights bulbs in the Triumph Speed Triple 765 R, a very simple and quick operation. First of all, …
How to Replace the Headlamp of the Triumph Street Triple 765R?
How to Replace the Headlamp of the Triumph Street Triple 765R?
Street Triple 765r To replace the headlamp of the Triumph Street Triple 765R, you need to loosen all the screws that secure the headlight unit to its housing: these scr…

How to Change the Transmission Oil in the Honda SH 150i Scooter?

Changing the transmission oil in the Honda SH 150i scooter, as shown in this tutorial, is an extremely simple and quick operation. First, wait until the engine is cool enough, then locate the three bolts at the rear of the casing and position a container underneath them. Next, use a 12mm socket to remove the two inner bolts, allowing all the oil in the system to drain out, and then tighten the lower bolt. At this point, simply pour in the new oil through the upper hole, using a syringe and a thin tube if necessary.

Watch the video!


by ScegliAuto

More videos