Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlamp of the Triumph Street Triple 765R?

Model: Triumph Street Triple 765r
Part: Headlight

Video tutorial

To replace the headlamp of the Triumph Street Triple 765R, you need to loosen all the screws that secure the headlight unit to its housing: these screws are located on the inner part of the dashboard and on the two side sections of the corresponding headlamp.

Once the screws have been loosened, you can pull the headlamp out from its housing and disconnect the connectors attached inside; this way, the old headlight unit can be completely removed and replaced with the new one. The new unit must then be secured and connected properly.


Updated on 22 September 2026 by ScegliAuto


Related tutorials

How to Install Heated Grips on a Triumph Street Triple 765R?
How to Install Heated Grips on a Triumph Street Triple 765R?
Street Triple 765r To install heated grips on a Triumph Street Triple 765R, first remove the mirrors by loosening the corresponding bolts, then take off the old grips. …
How to replace the headlight bulbs in the Triumph Speed Triple 765 R?
How to replace the headlight bulbs in the Triumph Speed Triple 765 R?
Street Triple 765r In this tutorial, we can see how to replace the headlights bulbs in the Triumph Speed Triple 765 R, a very simple and quick operation. First of all, …
How do you replace the exhaust on the Triumph Street Triple 765?
How do you replace the exhaust on the Triumph Street Triple 765?
Street Triple 765r The replacement of the exhaust installed on the Triumph Street Triple 765 can be carried out by loosening the screws that secure the end can to its h…

How to Replace the Rear Brake Pads on a Derbi Senda 125?

To replace the rear brake pads on a Derbi Senda 125, loosen the nut that secures the central axle of the rear wheel so that it can be completely removed from its housing. Once the wheel is removed, you can slide out the pin that secures the pads inside the brake caliper and remove them from their housing. After the old pads have been removed, insert the new replacement parts, securing them with the pin. Finally, reinstall the rear wheel, positioning it at the end of the swingarm.

Watch the video!


by ScegliAuto

More videos