Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial, you will see how to remove the exhaust silencer and the rear wheel on a Triumph Bonneville in simple and quick steps. First, position the bike on the centre stand and start by unscrewing the fixing screws of the silencer brackets, using 12 mm and 6 mm ratchet sockets; then remove the exhaust silencer as shown in the video. At this point, proceed to remove the rear wheel and perform the same operation with the other silencer; apply the reverse procedure for reassembly!

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the exhaust on the Triumph Bonneville?
How to replace the exhaust on the Triumph Bonneville?
Bonneville To replace the exhaust on the Triumph Bonneville, loosen the bolt securing the clamp, located at the junction between the exhaust and the remaining p…
How do you replace the exhaust pipe of the Triumph Bonneville?
How do you replace the exhaust pipe of the Triumph Bonneville?
Bonneville In order to replace the exhaust on the Triumph Bonneville, it is necessary to loosen the bolt that secures the exhaust at the front, near the cranksh…
How to Replace the Brake Pads on a Triumph Bonneville
How to Replace the Brake Pads on a Triumph Bonneville
Bonneville Below is the procedure necessary to remove and replace the brake pads, both front and rear, of the Triumph Bonneville in simple steps. First, place y…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos