Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on a Triumph Street Twin

Model: Triumph Street Twin
Part: Engine oil

Video tutorial

Let's see how to perform the routine maintenance service by changing the oil and oil filter on a Triumph Street Twin. First, position the bike on the centre stand and use an Allen key to unscrew the drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

Next, remove the oil filter using a socket wrench; now replace it with the new one, tightening it lightly.

Finally, pour in the new engine oil, filling to the correct level!


Updated on 16 April 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the Triumph Street Twin?
How to Change the Engine Oil on the Triumph Street Twin?
Street Twin To change the engine oil on the Triumph Street Twin, you need to loosen the drain plug of the oil sump, which is located at the central lower part of…
How to Change the Engine Oil on a Triumph Street Twin
How to Change the Engine Oil on a Triumph Street Twin
Street Twin To change the engine oil on the Triumph Street Twin, you need to unscrew the drain plug located at the central lower part of the bike: by unscrewing …
How to Remove the Front Headlight on a Triumph Street Twin
How to Remove the Front Headlight on a Triumph Street Twin
Street Twin Before you start, position your Triumph Street Twin on a paddock stand. Begin by unscrewing and removing the screws that secure the front headlight t…

How to replace the headlight bulb on a Ducati Monster 696

In this guide, discover how to remove and replace the headlight bulb on a Ducati Monster 696. First, place the bike on a stand and begin unscrewing the rear screws of the headlight to lower it for access to the rear lights; then remove the plastic cap and disconnect the electrical connector of the dipped beam bulb, removing it and replacing it with the new one (of the correct type and with the same fitting). At this point, reassemble the headlight unit, securing it properly, and check that all lights are functioning!

Watch the video!


by ScegliAuto

More videos