Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace Front Brake Pads on Triumph Speed Triple

Model: Triumph Speed Triple
Part: Brake pads

Video tutorial

In this video, learn how to remove and replace the front brake pads on a Triumph Speed Triple motorcycle by following these simple steps. First, unscrew the two fixing screws of the brake caliper using a 14 mm socket spanner; then, once the caliper is removed, take off the small clip or metal pin that holds the pads in place using pliers.

Now, unscrew the hex screws to remove and replace the brake pads; push back the piston to fit the new pads!


Updated on 17 April 2026 by ScegliAuto


Related tutorials

Speed Triple To replace the rear brake pads on a Triumph Speed Triple, loosen the screws that secure the rear brake caliper to the corresponding disc. Once these …
Speed Triple This guide shows you how to remove and replace the front brake pads on the Triumph Speed Triple 1050. First, place the bike on a stand and start unsc…
Speed Triple To replace the brake pads on a Triumph Speed Triple, you need to perform the same operation for both the rear and front wheels: in both cases, it wil…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos