Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads of the Triumph Street Twin

Model: Triumph Street Twin
Part: Brake pads

Video tutorial

In this brief and simple guide, see how to remove and replace the front brake pads of the Triumph Street Twin in easy and quick steps. First, place the motorcycle on its stand and begin unscrewing the bolts securing the brake caliper using a socket spanner; then use an Allen key to unscrew the pin of the pads to remove them, as shown in the video.

Clean the caliper of any residual dirt; then insert the new brake pads and reassemble the caliper!


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to replace the front brake pads of the Triumph Street Twin
How to replace the front brake pads of the Triumph Street Twin
Street Twin In a few simple steps, we will see the process of disassembling and replacing the front brake pads of the Triumph Street Twin motorcycle. First, we p…
How to Remove the Front Headlight on a Triumph Street Twin
How to Remove the Front Headlight on a Triumph Street Twin
Street Twin Before you start, position your Triumph Street Twin on a paddock stand. Begin by unscrewing and removing the screws that secure the front headlight t…
How to Replace the Spark Plug on a Triumph Street Twin
How to Replace the Spark Plug on a Triumph Street Twin
Street Twin Hello, today's guide aims to replace the spark plug on your Triumph Street Twin. Start by removing the side fairings of the motorcycle. Next, disconn…

Vespa Immobiliser: How to Transfer the Chip from the Old Key

In the case shown in the video, the new keys are not recognised by the ECU: the Vespa starts but does not run (thus the immobiliser is active). The solution shown in the video involves locating the immobiliser chip in the old key (the one recognised by the ECU). Open the cover on the key (only red master keys or some blue ones), remove the chip (which is a small black cylinder or rectangle), insert it into the new key in place of the new one, and try to start. Now the key will work. If the master key is red, it will definitely work. If it is blue, it might work: you need to cut the silicone; this is possible but a delicate operation. If it is a black clone key, then it is a system that does not work.

Watch the video!


by ScegliAuto

More videos