Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Triumph
    3. : Bonneville 900

How to Change the Engine Oil in the Triumph Bonneville 900?

Model: Triumph Bonneville 900
Part: Engine oil

Video tutorial

In this tutorial, see how to change the engine oil in the Triumph Bonneville 900, a very simple and quick operation. Before proceeding, ensure that the engine is completely cold for safety.

Start by placing a container underneath the bike, then using an 8mm hex key, unscrew the bolt located at the bottom of the engine. Collect all the oil from the system, unscrew the old filter, and fit the replacement.

At this point, tighten the bolt and add the necessary amount of oil through the top hole.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil of a Triumph Bonneville
How to Replace the Engine Oil of a Triumph Bonneville
Bonneville Start by positioning your Triumph Bonneville upright. Next, run the engine for a few minutes to help the engine oil drain out. Once done, place a con…
How to Replace the Engine Oil and Oil Filter of the Triumph Bonneville 650
How to Replace the Engine Oil and Oil Filter of the Triumph Bonneville 650
Bonneville 650 Follow these step-by-step instructions to replace the engine oil and oil filter while performing the routine maintenance service on the Triumph Bonne…
How to Change the Engine Oil in a Triumph Bonneville?
How to Change the Engine Oil in a Triumph Bonneville?
Bonneville In this tutorial, see how to change the engine oil in a Triumph Bonneville, a very simple and quick operation. First, ensure the engine is sufficient…

How to remove the seat on a Yamaha Tracer 9 GT?

In this tutorial, you can see how to remove the seat on a Yamaha Tracer 9 GT, a very simple and quick operation, for example, if you need to access the battery. First, remove the passenger seat by inserting the key into the designated lock, then locate the indicated rubber element and remove it by pulling it outwards. Next, insert your hand into the indicated gap, hold down the release lever, and simultaneously detach the seat from the support. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos