Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter of the Uaz Pickup

Model: UAZ Pickup MK 1 - Years 2008-2022
Part: Air filter

In this video tutorial, you will learn how to remove and replace the engine air filter of the Uaz Pickup by following these simple and quick steps. First, open the hood of your vehicle and start unscrewing the screw of the air filter clamp connected to the intake hose; then remove the filter box as shown in the video. At this point, replace the air filter with a new one of the correct type; insert it in the correct direction and install everything back onto the intake hose, following the video tutorial to the end!

Updated on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in the UAZ Pickup?
How to Replace the Cabin Air Filter in the UAZ Pickup?
UAZ Pickup (2008-2022 / MK 1) As seen in this tutorial, replacing the cabin air filter in the UAZ Pickup is a very simple and quick operation. The filter is located behind the glo…
Guide to Installing a Tow Hitch on the Uaz Pickup
Guide to Installing a Tow Hitch on the Uaz Pickup
UAZ Pickup (2008-2022 / MK 1) In this guide, you will find the steps to install a tow hitch on the Uaz Pickup, following the instructions provided below. First, move to the rear o…
How to Convert a Uaz Pickup into a Small Camper
How to Convert a Uaz Pickup into a Small Camper
UAZ Pickup (2008-2022 / MK 1) In this video, we show you how to convert a Uaz Pickup into a small camper. If you want your Uaz Pickup to be suitable for vacations, all you need ar…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos