Do it yourself
| ||||
|
UAZ Hunter 469 - Video tutorial
Model: UAZ Hunter 469
MK 1
- Years 1997-2022 In this tutorial we can see how to replace the air filter in the UAZ Hunter, an extremely simple and fast operation. Before proceeding, let's make sure that the engine is cold in order to operate safely. We start by opening the hood, then locate the filter box and disconnect the intake manifold by unscrewing the screw of the relevant clamp. Once this is done, with a 17mm wrench, unscrew the nut located in the front part of the airbox and extract the filter. Finally, we assemble the spare part following the reverse procedure and after having cleaned the housing thoroughly.
Posted on 25 May 2023 by ScegliAuto
Other guides that may interest you
|
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.036
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |