Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Install an Armrest on a UAZ Hunter 469

Model: UAZ Hunter 469 MK 1 - Years 1997-2022

If you want to install the center armrest on your UAZ Hunter 469, you should visit this site: myuaz.com where you will find everything that can be useful for your UAZ. The part costs only $95. The YouTuber did not install a base for the armrest but simply secured it between the two seats by putting a screw into the floor of the vehicle next to the handbrake. This is a very makeshift but effective solution because you just need to position the armrest over the screw and tighten the bolt inside, and the armrest stays secured in place, also providing extra space to use.

Updated on 29 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Differential on the UAZ Hunter 469?
How to Replace the Differential on the UAZ Hunter 469?
UAZ Hunter 469 (1997-2022 / MK 1) To replace the differential on the UAZ Hunter 469, loosen the screws that secure the two half shafts and the differential located at the center of th…
How to Activate the All-Wheel Drive in the UAZ Hunter 469?
How to Activate the All-Wheel Drive in the UAZ Hunter 469?
UAZ Hunter 469 (1997-2022 / MK 1) To activate the all-wheel drive in the UAZ Hunter 469, tighten the central bolts of the wheels using a hex wrench as shown in the tutorial. Once the …
How to Close the Doors and Windows on the UAZ Hunter 469
How to Close the Doors and Windows on the UAZ Hunter 469
UAZ Hunter 469 (1997-2022 / MK 1) In the video below, we discuss the UAZ 469, which has a unique door and window opening and closing system. Here’s how to open and close them: the win…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos