Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Fuel Tank from the Uaz Hunter 469

Model: UAZ Hunter 469 MK 1 - Years 1997-2022

Let's look at the main instructions that will allow us to remove and replace the fuel tank of the Uaz Hunter 469. First, raise the vehicle and start unscrewing the bolts of the tank brackets using a socket wrench; then use a jack to lower the tank from the vehicle's frame, as shown in the video. At this point, drain the fuel inside the tank by disconnecting the fuel hose; remove the fuel pump by disconnecting the electrical connector of the tank!

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Activate the All-Wheel Drive in the UAZ Hunter 469?
How to Activate the All-Wheel Drive in the UAZ Hunter 469?
UAZ Hunter 469 (1997-2022 / MK 1) To activate the all-wheel drive in the UAZ Hunter 469, tighten the central bolts of the wheels using a hex wrench as shown in the tutorial. Once the …
How to Close the Doors and Windows on the UAZ Hunter 469
How to Close the Doors and Windows on the UAZ Hunter 469
UAZ Hunter 469 (1997-2022 / MK 1) In the video below, we discuss the UAZ 469, which has a unique door and window opening and closing system. Here’s how to open and close them: the win…
Install an Armrest on a UAZ Hunter 469
UAZ Hunter 469 (1997-2022 / MK 1) If you want to install the center armrest on your UAZ Hunter 469, you should visit this site: myuaz.com where you will find everything that can be us…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos