Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Lock of the Uaz Hunter 469?

Model: UAZ Hunter 469 MK 1 - Years 1997-2022
Part: Door lock

To replace the door lock of the Uaz Hunter 469, loosen the two screws that secure the internal door handle, completely removing it. Once the handle is removed, you can unscrew the screws on the side of the door, next to the weatherstrip: by unscrewing these, you can completely pull out the internal door mechanism, allowing you to insert a new one. This can then be positioned and secured in its housing using the side screws, reinstalling the internal handle as well.

Updated on 14 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Air Filter in the UAZ Hunter?
How to Replace the Air Filter in the UAZ Hunter?
UAZ Hunter 469 (1997-2022 / MK 1) In this tutorial, you will see how to replace the air filter in the UAZ Hunter, a very simple and quick operation. Before proceeding, ensure the engi…
Guide to Removing the Fuel Tank from the Uaz Hunter 469
Guide to Removing the Fuel Tank from the Uaz Hunter 469
UAZ Hunter 469 (1997-2022 / MK 1) Let's look at the main instructions that will allow us to remove and replace the fuel tank of the Uaz Hunter 469. First, raise the vehicle and start …
How to Replace the Battery in a Uaz Hunter
UAZ Hunter 469 (1997-2022 / MK 1) If you plan to replace the battery in this vehicle yourself, follow the simple instructions provided in this description and refer to the images in t…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos