Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. UAZ
  4. :
  5. Patriot
  6. : How to remove the lock of the front door of the UAZ Patriot

UAZ Patriot - Video tutorial

Model: UAZ Patriot MK 1 - Years 2005-2022
Part: Lock
Operation: How to remove the lock of the front door of the UAZ Patriot

In today's video tutorial we will see how to remove and replace the lock or the actuator of the front door of the Uaz Patriot. First we open the front door and start by disassembling and removing the door panel; then unscrew the fixing screws located on the panel, disconnecting the cable of the opening handle, as shown in the video. At this point we are going to unscrew the internal screws of the lock, releasing the metal rod; then remove the entire actuator and replace it with the new one, applying the reverse procedure for reassembly!


Posted on 25 April 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos