Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video we can see how to reset the DTC Honda gearbox, which guarantees smooth stability and smooth gear changes without jerking. All bikes with DTC become a bit clumsy after a while, and this is an easy and quick solution. The bike must be at operating temperature and with the engine off, we put it in neutral. Press and hold the "D" button; turn on the dashboard without starting the engine. Wait while the yellow engine light comes on, then press the "D" button again. Press the buttons in this order: D-D-N-D-N. Now "D" and "S" should appear on the display. Now start the engine and after a few seconds we will see the bike recalibrating the clutch and the DTC system. It is an operation that the youtuber recommends doing every two thousand kilometers.

Posted on 3 November 2024 by ScegliAuto

Video tutorial

Related tutorials

DCT type changeover of Honda.
DCT type changeover of Honda.
(Various brands) Various If we need to reset the DCT gearbox of Honda motorcycles, we start by warming up the bike without starting the fan and putting the gearbox in neutral…
How to restore a vehicle's headlight
How to restore a vehicle's headlight
(Various brands) Various Today we will explain how to restore the front headlight of a vehicle. To perform this operation, we need to place masking tape around the headlight,…
How to restore a damaged steering wheel and gear lever
How to restore a damaged steering wheel and gear lever
(Various brands) Various Let's see how we can restore the damaged steering wheel of our old car. We protect the areas that we do not need to treat with plastic sheets, then w…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos