Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
How to replace the engine air filter on a scooter? Follow this guide to proceed with the replacement. Position the scooter on its centre stand. Using a screwdriver, unscrew the securing screws of the air filter container. After removing the securing screws, lift off the cover and remove the air filter. If damaged, place a new filter or reposition the same one after cleaning it (use an air compressor). Finally, close the air filter container and tighten the screws with the screwdriver.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Starter Motor on a Burgman 400 Scooter
(Various brands) Various This video tutorial shows how to replace the starter motor on a Burgman 400 scooter by following some simple steps that will allow you to work indepe…
When to Replace the Air Filter?
When to Replace the Air Filter?
(Various brands) Various A clogged air filter can cause significant damage to your vehicle. Although it may not seem like it, the air filter has a tough job of keeping the ai…
How to start a scooter that won't start
How to start a scooter that won't start
(Various brands) Various In this video we see how to start a scooter that doesn't want to start: it is something that can happen normally if the scooter has been stationary f…

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos