Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video we see how to start a scooter that doesn't want to start: it is something that can happen normally if the scooter has been stationary for too long. We will have to hold down the yellow start button for at least thirty seconds and the scooter will start. However, if we still have problems, we need to go to the side of the air filter, cover it completely with our hand as if we were suffocating it and turn the key to the "ON" position: with our right hand we pull the brake lever and press the start button. It will make a noise as if the engine is choking, but eventually it will start. Remember that this is not something that can be done daily, but only after the scooter has been stationary for a long period.

Posted on 27 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing Variator Rollers on a Scooter
Replacing Variator Rollers on a Scooter
(Various brands) Various In this video tutorial, you will see how to remove the rollers from the variator of a generic scooter. The procedure may vary from scooter to scooter…
How to Replace the Brake Shoes on a Sym 125 Scooter
How to Replace the Brake Shoes on a Sym 125 Scooter
(Various brands) Various The video shows how to replace the brake shoes on a scooter, but the procedure is the same for any scooter, including the Sym 125. Start by removing …
How to Reset the Odometer on Kymco Scooters?
(Various brands) Various If you own a Kymco scooter and want to manually reset the odometer, simply follow this procedure. It will only take a few seconds. First, insert the …

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos