Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reasons Why a Car Won't Start

Model: (Various brands) Various
Part: Checks and maintenance

Why won't a car start? The first reason could be the battery; if you insert the key and the car is dead, then the battery is gone. If the starter is good, the engine turns over well, and the lights are not dim, check if you see smoke from the exhaust. In diesel engines, you will see black smoke; in petrol engines, you can smell petrol from the exhaust; the fuel system is working, but there is no power getting through. It could be a problem with the spark plugs or glow plugs. Alternatively, if you don't smell petrol and don't see any smoke, it means fuel is not getting through; you may have run out of diesel (or petrol), the pump inside the tank may be stuck, or the injectors may not be opening.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Reasons why Start & Stop does not work and a trick to make it work
Reasons why Start & Stop does not work and a trick to make it work
(Various brands) Various The Start & Stop system activates when certain conditions are met, such as: the vehicle is stationary, the seatbelt is fastened, the gearbox is in ne…
Reasons why the tire monitoring system may not work
Reasons why the tire monitoring system may not work
(Various brands) Various In reality, when the tire pressure monitoring system is not working, the reasons can be different: the sensors' battery is low, a problem with the TP…
Reasons to Deactivate the Front Passenger Airbag
Reasons to Deactivate the Front Passenger Airbag
(Various brands) Various There are reasons why it is mandatory to deactivate the front passenger airbag. Typically, this switch is located on the outer side of the dashboard,…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos