Do it yourself
Frequently asked questions about cars and motorcycles

How to Connect a Secondary Battery to the Scooter When It Won't Start

Model: (Various brands) Various
Part: Battery

In this video tutorial, you will see what to do when the scooter's battery is flat and it won't start. A scooter or motorcycle battery can discharge for various reasons (cold weather, wear, etc.). A very useful trick to avoid being stranded is to connect two cables permanently to the battery terminals (full power from 2,600) from three cells; you can also connect a larger battery. To perform this procedure, you need to unscrew the screw located under the scooter's handlebar and remove the cover and the rod that holds it in place. Now unscrew the negative terminal and loosen the positive terminal of the battery. Take the cable that will go to the negative and solder it to the female connector. Now put heat shrink tubing over it. Do the same for the positive, soldering the longer cable that goes to the positive terminal. Now screw the two eyelets, one to the positive terminal and the other to the negative. With this system, if the main battery discharges, you can connect the auxiliary battery and start again without worry.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various This video demonstrates how to connect a battery maintainer to a scooter battery. This device is useful during long periods of inactivity, such as th…
(Various brands) Various In this video, see how to replace the battery of a Chinese scooter (this method should work for most scooters): you only need a crosshead screwdriver…
(Various brands) Various In this video, we are explained in detail what the function of an auxiliary battery is. Not always the main battery is sufficient to power all the de…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Where is the battery located on the Sym Jet X 125? Read answer
    • Vari - Where is the battery located on the Yamaha Xenter 125? Read answer
    • Vari - Where is the Sym Symphony 125 battery located? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos