|
Do it yourself
| |||
| ||||
I am causing problems with the immobilizer of a vehicle.
Model: (Various brands) Various
In this video we see how car immobilizers work: the principle is that every time we turn the key the computer reads the key code and compares it with the codes held by the vehicle. If they match, the vehicle starts. If the vehicle does not recognize the code, then the vehicle will not start. These are general indications, but each vehicle has its own unique system, to which reference should be made in the owner's manual. If it is a keyless vehicle, and the remote control has a flat battery, most vehicles have a backup procedure so that the vehicle can still be started. The immobilizer light comes on when the key is not recognized: if it comes on, try closing the vehicle again, and normally this problem is solved, or try starting the engine a couple of times. It may be convenient to try with the second key, as the problem may be the key. If the vehicle starts and then immediately turns off, do not hesitate to call a tow truck and take it to the workshop, as it is a fault that cannot be repaired by an amateur.
Posted on 25 August 2024 by ScegliAuto
Video tutorial
Related tutorials
(Various brands) Various
In this video we can see how to use a thermal camera to check for any issues regarding the heating or air conditioning system of a car. Maybe it is a…
(Various brands) Various
In this video, some problems that can occur on an automatic transmission are presented to us; if when we start instead of feeling a smooth engagement…
(Various brands) Various
This video explains the problems that a broken dual mass flywheel can cause and the symptoms that are noticeable even to the driver. The dual mass fl…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.225
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |