Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to perform the TPS reset of the AIM control unit?

Model: (Various brands) Various
Part: Control unit
How to perform the TPS reset of the AIM control unit?

To perform a Tps Reset on an Aim Taipan control unit, follow this procedure with the engine off. Press the power button and the shutdown button simultaneously, a light on the left will start flashing. Give two accelerations and press the shutdown button again, now the light will be steady, indicating that the control unit is processing. When the light starts flashing again, accelerate to full throttle and press the shutdown button again. At this point, when the light starts flashing, release the accelerator. The procedure has been executed correctly.


Posted on 9 September 2023 by ScegliAuto



How do you reset the BSI unit of Citroën cars?
(Various brands) Various In order to reset the BSI control unit of Citroën cars, it is necessary to remove the device from its housing, which is usually located inside the en
How to reset the ECU on the Sym Symphony
(Various brands) Various The ECU or the engine control unit is in practice the brain of the engine, that is the control unit that manages it. If we need to reset the malfunct
To reset the service with multiscan.
(Various brands) Various (2011-2023 / ) To perform a service reset on a Fiat using Multiecuscan software (previously known as FiatECUScan), follow these steps: 1. Make sure you have a com

    Frequently Asked Questions

    • Vari - Where is the central locking unit located on Ford cars? Read Answer
    • Vari - Where is the radiator fan fuse located? Read Answer
    • Vari - Why does the dashboard of the Mini Cooper light up but the car doesn't start? Read Answer
    • Vari - How much does it cost to change the ECU? Read Answer
    • Vari - How much does it cost to replace the ECU on a car? Read Answer
    • Vari - How much does it cost to replace the BCM ECU? Read Answer
    • Vari - How do you replace the xenon control unit of a Mercedes? Read Answer
    • Vari - What does the ffc fault code on the Iveco mean? Read Answer
    • Vari - Where is the Freemont oil pressure sensor located? Read Answer
    • Vari - What to do if the Camper's 12V power supply doesn't work? Read Answer
    • Vari - How much does it cost to replace the BSI ECU on a Peugeot? Read Answer
    • Vari - How much does it cost to reprogram the bsi? Read Answer
    • Vari - Where is the central locking control unit located? Read Answer
    • Vari - Where is the automatic transmission control unit located? Read Answer
    • Vari - What does IBC error mean? Read Answer
    • Vari - How much does the repair of the Opel Corsa ABS control unit cost? Read Answer
    • Vari - Where is the Fiat Grande Punto horn relay located? Read Answer
    • Vari - How to reset the control unit? Read Answer
    • Vari - How to program the engine control unit? Read Answer
    • Vari - What to do if the start & stop does not work? Read Answer

How to change the engine oil of the Kymco AK 550?

In order to replace the engine oil of the Kymco AK 550 you have to unscrew the oil drain plug, which is located in the lower central part of the bike, at the initial part of the muffler. Once this cap has been unscrewed, it will be necessary to collect the used oil in a suitably positioned container. Then you will have to wait until the oil is completely finished and you can replace the oil filter which is in the same position as the drain plug. Finally, it will be necessary to top up by inserting the oil in the breather located on the left side of the bike.

Watch the video!


by ScegliAuto

More videos