Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
What is the remapping of a control unit? It is the modification of the software of our control unit, and we do it to get more power, or to customize the behavior of the car, or we do it when we replace important components, such as the turbine for example, for which we have to adapt the software to the new component . The control unit is the brain of the machine, which receives inputs from sensors and operates actions by means of the actuators. By changing the mapping we do nothing but change the way in which the control unit does things with the same signal received. It goes without saying that remapping the control unit is a very delicate operation, and must be done by companies with proven experience and effectiveness; a bad modification can cause serious trouble.
Posted on 26 May 2024 by ScegliAuto
Are additional control units to be connected to the EOBD socket valid?
(Various brands) Various Our youtuber, a true tuning professional, had the opportunity to test one of those additional control units - which are very fashionable now - and wh
How to reset the ECU on Chrysler, Dodge, Jeep cars
(Various brands) Various Today we will show you a very simple but clever trick to reset the car ECU at no cost. Turn off the car, pull the handbrake and remove the ignition k
How to reset the ECU of the Geely Emgrand
(Various brands) Various If the control unit (ECU) of your Geely Emgrand is giving you major operating problems then you must perform a manual reset to resolve any momentary Other guides that may interest you
|
Frequently Asked QuestionsFiat Ducato 2.8 JTD gearbox oil replacementLet's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.060
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |