Do it yourself
Frequently asked questions about cars and motorcycles

How to Preserve Your Car's Turbo with a Simple Gesture

Model: (Various brands) Various
Part: Turbocharger

Appreciate this simple tip that can save your car's turbo. After a long or intense journey (motorway, mountains, sporty driving), do not turn off the engine immediately; instead, leave it running at idle for 30 to 60 seconds. This allows the oil to continue circulating and cool the turbo, preventing oil carbonisation and premature wear. This is because the turbo spins at 200,000 RPM and is lubricated only by a thin film of engine oil. When you abruptly turn off the car after an intense journey, the oil pump shuts down, the turbo shaft continues to spin, and the remaining oil inside overheats, cooks, and turns to carbon, which over time becomes abrasive, damaging the bearings and causing them to seize. Therefore, following this simple advice from the YouTuber will help you avoid costly troubles.

Posted on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various Want to remove the car turbocharger? First, lift the bonnet. Remove the soundproofing panel from the engine bay (if available), then undo the turboch…
(Various brands) Various On a car with a turbocharger, the wastegate valve is essential to prevent damaging the turbo itself. This video explains it in a very simple and unde…
(Various brands) Various In this video tutorial, you can see how to remove a vehicle's turbocharger by following some steps that will guide you towards proper management of y…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos