Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the ignition switch of the Niu N, first you need to loosen the screws that secure the front fairing of the motorcycle to its housing: once this panel has been removed, it will be possible to remove the counterweight positioned at the end of the corresponding handlebar. Once the counterweight has been removed, you can slide off the handlebar and then disconnect the switch connector: by loosening the screws that secure the switch to its housing, you can insert the new one and verify that everything works correctly.

Posted on 22 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove a Starter Cylinder
How to Remove a Starter Cylinder
(Various brands) Various In this guide, you will learn how to remove a starter cylinder. Start by removing the screws securing the lower cover of the steering column and slid…
How to Remove the Door Lock
How to Remove the Door Lock
(Various brands) Various Do you want to remove the door lock of your car? If you want to replace the car lock, it is important to first remove the door trim panel. Remove var…
How to Resync a Remote After Changing the Battery
How to Resync a Remote After Changing the Battery
(Various brands) Various After replacing the battery in the remote, it may no longer function. The cause is often a loss of synchronisation. To resolve this, remove the metal…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos