Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt

Model: (Various brands) Various
Part: Timing belt

This simple operation is explained in this brief video guide, which illustrates the steps to remove the timing belt from your vehicle. The belt runs over pulleys on the side of your engine and is tensioned by either tensioner pulleys or the alternator itself. To remove it, you will need to move either the tensioner pulley or the alternator, allowing you to extract it without issues. Compare the old belt with the new one to be installed and follow the steps in reverse for reassembly.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

When should the car's timing belt be replaced?
When should the car's timing belt be replaced?
(Various brands) Various The timing belt or timing chain is used to synchronize the pistons with the valve opening, so if the car has a faulty timing belt or chain, the engin…
When to Change the Timing Belt or Chain?
When to Change the Timing Belt or Chain?
(Various brands) Various In this guide, you will learn when to replace the timing belt or chain on most vehicles. The timing belt and chain should be checked periodically, pe…
How to replace the timing belt of the Euorocomah
How to replace the timing belt of the Euorocomah
(Various brands) Various The timing belt on a Eurocomah 16q work vehicle is located inside the engine compartment, near the fuel pump and the engine. To replace the timing be…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos