Do it yourself
Frequently asked questions about cars and motorcycles

How to Reattach Badges and Emblems on Your Car

Model: (Various brands) Various
Part: Manufacturer emblem

Video tutorial

Badges and emblems on your car can come loose and fall off, and if not reattached correctly, they may come off again. This video teaches you how to do a proper job permanently.

Most of these components are attached with double-sided tape, and when they come off, part of it remains stuck to the bodywork; this sticky part collects dust and debris, which is why when reattaching your badge, it continues to fall off. You need to remove it completely; there are many types of solvents suitable for this purpose, but the YouTuber is using fine wet sandpaper and a lot of care.

It would also be a good idea to completely remove the badge and take measurements first, perhaps with some masking tape, to ensure you reposition the badge exactly in its place.

Naturally, as seen in the video, if you want to reuse the same badge, you need to do a tedious and precise job, perfectly cutting the double-sided tape around the badge: remove the protective paper and heat the back of the badge with a lighter, so it adheres better to the surface of the bodywork.


Updated on 3 November 2026 by ScegliAuto


Related tutorials

(Various brands) Various Taking care of your vehicle's aesthetics means not only repairing the bodywork if damaged but also dealing with the badges, logos, and various sticke…
(Various brands) Various The procedure for reattaching the rear view mirror on a vehicle (in this case, a van) is the same for all vehicles. First, clean the area of the glas…
(Various brands) Various Reattaching the car headlining fabric is not advisable for several reasons: the fabric will never fit precisely again, as it has been laser cut and t…

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos