Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove logos, emblems, and lettering from your car

Model: (Various brands) Various
Part: Manufacturer emblem

Taking care of your vehicle's aesthetics means not only repairing the bodywork if damaged but also dealing with the badges, logos, and various stickers that adorn it. To remove old lettering and stickers, you will need: a heat gun, a plastic spatula, adhesive remover spray, and a cloth. Start by positioning the heat gun on the sticker you want to remove, then use the spatula to pry it off, and finally spray the adhesive remover and clean with a soft cloth. Repeat this for all stickers. Once removed, give your car a good clean.

Updated on 26 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to reattach writings and emblems to your car
How to reattach writings and emblems to your car
(Various brands) Various The emblems and writings on your car can come loose and fall off, and if they are not reattached properly, they can come off again. This video teache…
How to set up the logo of your car on an Erisin 2DIN car stereo
How to set up the logo of your car on an Erisin 2DIN car stereo
(Various brands) Various This video is not dedicated to a car model, but to a 2Din radio model made in China, which can therefore be installed on any car. If we want to custo…
How to remove the writings from the body of our car
How to remove the writings from the body of our car
(Various brands) Various In this video we can see how to remove the writings we find on the body of our car; in fact, not everyone likes them and many find the body more plea…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos