Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. IVECO
    3. :
  3. Eurocargo
    4. : How to replace the light bulb on Iveco Eurocargo

IVECO Eurocargo - Video tutorial

Model: IVECO Eurocargo MK 1 - Years 2002-2008
Part: Headlight bulb
Operation: How to replace the light bulb on Iveco Eurocargo

This video explains us how to remove the bulbs on an Iveco Eurocargo. Let's see carefully how to do it. The first step to perform: we lift the vehicle on a column bridge, then with a screwdriver we go to unscrew the screws placed in the front bumper as in the video. Now remove the headlight from the bumper of the vehicle, disconnect the lamp holders from the headlight with a special pliers and replace the bulbs. We insert the new bulbs in the housing and reconnect the lamp holders in the lighthouse, we tighten all the pins of the same with the socket wrench. Finally we test the correct functioning of the lights.


Posted on 15 October 2023 by ScegliAuto



How to replace the headlight bulb of the Iveco Eurocargo?
IVECO Eurocargo In order to replace the Iveco Eurocargo headlight bulb, you have to completely disassemble the front bumper, unscrewing the fixing screws and removin
How do you set the Iveco Eurocargo clock?
IVECO Eurocargo In order to set the Iveco Eurocargo clock, you need to turn on the instrument panel, so that you can then move around the menu with the steering whee
What does ibc Iveco Eurocargo mean
IVECO Eurocargo (2002-2008 / MK 1) The display in the center of the Iveco Eurocargo instrument panel represents the so-called IBC system: Iveco Body Computer; this device allows you to

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos