Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of the Fiat Doblo

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Front bumper

The steps to follow to remove the front bumper of the Fiat Doblo are: The first step is to remove the clips that protect the screws. The second step is to unscrew the lower screws of the bumper. The third step is to unscrew the side screws of the bumper and the wheel arch. The fourth step is to unscrew the upper screws of the bumper. The fifth step is to remove the bumper from its housing. The assembly of the bumper does not require additional steps to those of removal, in fact, it will be enough to repeat the procedure in reverse.

Posted on 30 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Grille from Above the Bumper of a Doblo
Removing the Grille from Above the Bumper of a Doblo
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) Remove the grille from above a Fiat Doblo? Here’s how to detach it from the front bumper. Using the appropriate screwdriver, unscrew the screws on to…
Removing the Front Bumper on a Fiat Doblò
Removing the Front Bumper on a Fiat Doblò
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) Today we will see how to remove the front bumper of a Fiat Doblò. First, lift the vehicle with a jack and remove the wheel by unscrewing the bolts. T…
How do you disassemble the front headlight of a Fiat Doblò?
How do you disassemble the front headlight of a Fiat Doblò?
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) To disassemble the front headlight of the Fiat Doblò, it is necessary to also remove the bumper, because to remove the headlight, there is a bolt - w…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos