Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the front headlight of a Fiat Doblò?

Model: Fiat Doblo MK 2, Doblo 2, 263 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Headlight

See other generations:
Video tutorial

To disassemble the front headlight of the Fiat Doblò, it is necessary to also remove the bumper, because to remove the headlight, there is a bolt - which the YouTuber shows us - that is hidden behind the bumper. This is removed by removing the four screws seen from above and then the six small screws that must be removed from the bottom, plus four Torx screws in the center.

Then we will have to remove the wheels to remove the wheel arch and the plastic screw that connects the bumper to the body: after that, the bumper comes off easily. To remove the headlight at this point, there are only three screws, then the electrical connectors must be disconnected.


Posted on 23 June 2025 by ScegliAuto


Related tutorials

Removing the Front Headlight of the Fiat Doblò
Removing the Front Headlight of the Fiat Doblò
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) Below are the instructions to remove and replace the front headlight of the Fiat Doblò. First, open the bonnet of the vehicle and start by removing t…
How to Replace the Front Brake Pads on a Fiat Doblo
How to Replace the Front Brake Pads on a Fiat Doblo
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) Before you begin, lift the front of your Fiat Doblo using the appropriate jack included in the standard toolkit provided by the manufacturer. Start b…
How to Remove the Front Headlamp of a Fiat Doblo
How to Remove the Front Headlamp of a Fiat Doblo
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) Replace the front headlamp of a Fiat Doblo if it cannot be repaired. Start by removing the front bumper to access the headlamp. Undo the securing bol…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos