Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Headlight of the Fiat Doblò

Model: Fiat Doblo MK 2, Doblo 2, 263 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Headlight

See other generations:
Video tutorial

Below are the instructions to remove and replace the front headlight of the Fiat Doblò. First, open the bonnet of the vehicle and start by removing the front bumper, unscrewing all the fixing screws found above the bumper and on both sides of the front wheel arches; then unscrew the screws of the headlight unit, disconnecting the electrical connector of the bulbs as shown in the video.

At this point, replace the bulbs if necessary or the entire headlight unit, finally refitting the headlight and the bumper!


Posted on 1 February 2026 by ScegliAuto


Related tutorials

Removing the Front Headlamp of a Fiat Doblò
Removing the Front Headlamp of a Fiat Doblò
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) In today's tutorial video, you will learn how to remove and replace the front headlamp of a Fiat Doblò in simple steps. First, open the car's bonnet …
How to Remove the Radio from a Fiat Doblo
How to Remove the Radio from a Fiat Doblo
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) Before starting, sit in the driver's seat of your Fiat Doblo. Begin by inserting the extraction keys into the holes on the front of the radio to rele…
When and How to Change the Timing Belt on a Fiat Doblò 1.6 MultiJet
When and How to Change the Timing Belt on a Fiat Doblò 1.6 MultiJet
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) In this tutorial video, you will see how to remove and replace the timing belt on a Fiat Doblò 1.6 MultiJet, following the instructions below. First,…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos