Do it yourself
| ||||
|
Fiat Doblo - Video tutorial
Model: Fiat Doblo
MK 2, Doblo 2, 263
- Years 2009-2021 In this video tutorial we will see how to remove and replace the timing belt of the Fiat Doblò 1.6 Multijet, following the instructions below. First of all we lift the car and go to remove the right front wheel; we then remove the crankshaft pulley and the V-belt. At this point we open the bonnet and disassemble the engine support, then removing the timing cover; now we take the references necessary for disassembly and replacement of the belt, following the video tutorial until the end for reassembly!
Posted on 5 April 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsReplace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.071
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |