Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Auxiliary Belt on a Fiat Doblò 1.3 MultiJet

Model: Fiat Doblo Doblo 1, MK 1, 223 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: V-belt

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the auxiliary belt on a Fiat Doblò 1.3 MultiJet. First, lift the vehicle and remove the front right wheel by unscrewing the bolts; then locate the auxiliary belt around the pulleys and the alternator.

At this point, loosen the tensioner with a spanner and remove the belt; fit the new, correct type of belt by loosening the tensioner and inserting the belt as shown in the video.

Finally, reattach the front wheel, tightening the bolts!


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to Change the Timing Belt on Fiat Doblò 1.9 MultiJet
How to Change the Timing Belt on Fiat Doblò 1.9 MultiJet
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) In this video tutorial, you will see how to remove and replace the timing belt on a Fiat Doblò 1.9 MultiJet, following the instructions below. First,…
Instructions for Replacing the Timing Belt on a Fiat Doblo 1.6 MultiJet
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) Today, in this brief guide, you will find the main instructions for removing and replacing the timing belt on a second series Fiat Doblo with a 1.6 M…
When and How to Change the Timing Belt on a Fiat Doblò 1.6 MultiJet
When and How to Change the Timing Belt on a Fiat Doblò 1.6 MultiJet
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) In this tutorial video, you will see how to remove and replace the timing belt on a Fiat Doblò 1.6 MultiJet, following the instructions below. First,…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos